All working great for me. Just over 37Mb free mem, boot time is 90 seconds, key-lock working again and reset device in Meterberry works without any intervention.
This may just be the OS that kills my constant need to upgrade! Thanks for this hybrid Willyboy!
Sorry to have you guys running around in circles here looking for the VVM files.... Please try the link below and follow my instructions from above. Thanks for your patience.
Also, OP link and installer are updated to include the VVM files, so first time downloaders do not need to worry about the patch.
Please be sure the double check that the installer is pointing to the correct loader folder before loading this hybrid!
Last edited by willyboy6; 03-16-2010 at 11:55 AM.
Still no visual voice mail
Hi again, Willyboy . .
I sent you a PM - still no luck getting VVM into V1.3 . .
What happens when you try to insert the VVM files from the patch into the device via BBSAK? (You don't need all the languages, only the one you plan on using)
I did try that - does not work (that is what I tried initially); when that did not work, I then tried re-downloading a new/clean copy of the installer and tried to run it on a freshly installed (unmodified) .411 from the link you provided. Same problem after doing so.
Originally Posted by willyboy6
This is very odd. The patch that I provided is all the vvm files that are included in the installer and it should work both ways.
Originally Posted by Don Henry
Please try these VVM files. The one's I provided were from .442 and these ones are from .411....
NEW vvm patch
Thanks - will try the new patch - to make sure I am doing things correctly, should I use BBSak to put these new files into my device OR should I paste the files into the base OS or the V1.3 installer?
If paste into the installer - can you tell me specifically what I should do to accomplish that?
THANKS A TON FOR EVERYTHING!!
Tags for this Thread