hi i have a 9500 storm and now sometimes the screen doesnt recognize my fingers i need to do a battery pull or i touch one letter and highlight another letter should i need to replace the screen ???
hi i have a 9500 storm and now sometimes the screen doesnt recognize my fingers i need to do a battery pull or i touch one letter and highlight another letter should i need to replace the screen ???
So when you press down on the screen nothing registers? It does sound like a hardware issue. Couldn't hurt to have it replaced.Quote:
Originally Posted by erneberry
i used to have the bussines card for batery cover maybe that damaged something .
but this screen issue just happens sometimes
its very wierd and in the page they have 2 types os screen for storm i dont know which one is the one for me
cnn.cn
any ideas ???
Have you tried the torx fix? :)Quote:
Originally Posted by erneberry
The business card should not have damaged anything. I have been using since November and all is fine. If the issue persists or gets worse you should have it replaced as it sounds like a hardware issue.Quote:
Originally Posted by erneberry
should i loose or tight the torx?
Loosen.Quote:
Originally Posted by erneberry
I agree with Josh.....I have had my last storm for quite a while and screen click been perfect out of the box and still is with no fixes....so if yours is acting up, I would definitely get it replaced. :)Quote:
Originally Posted by jlevy73
i boughted from someone long time ago
i just loose half and its doing well i will try it to see what happens thanks
now the screen click feels better
Ok, keep us posted...if you bought it from someone, then your best bet would be to try all possible fixes. :)Quote:
Originally Posted by erneberry
Good to hear. Just loosen it a little bit at a time until you find the right setting for you. This should solve your problem.Quote:
Originally Posted by erneberry
also if you use a pencil, you can mark the screw so you know how many turns you made. :)Quote:
Originally Posted by jlevy73