How to fix the screen click on the Blackberry Storm
Credit to Jascias for this fix
This has fixed many members screen click problem.
1. You will need a micro TORX (T6) screw driver and small needle.
2. Open the back cover and you will see a red sticker, (The red sticker is a water detection sticker), and across from it you will see a torx screw. Under the red sticker is another screw. These 2 screws may be screwed on too tight.
3. Using the small needle, you can take off the sticker for replacement later.
Unscrew both screws in I would try turning in 1/8 turn increments.
4. Replace sticker, screen is fixed.
Take your time, and sometimes it may not be needed to adjust both screws.
Put your back cover on in between turns to test.
Hope this helps for those who wish to try it.
BlackberryOS and anyone associated do not take responsibility for any damage done by trying this procedure.
Please do so at your own risk.
Last edited by Bryan; 06-18-2009 at 08:55 PM.
I updated the OP to give the credit to Jascias who originally wrote it...I paraphrased.
Originally Posted by Stiefler07
Any danger in doing this while connected to the USB as in the pics? I have done this on two of my previous storms and it works great.
I'm sure it would be safer to be unhooked and with the battery unplugged. I only took the pictures with it plugged in.
Originally Posted by Rellims
I did the fix a long time ago with it disconnected from all.
No rellims there should not be any danger in doing it while connected to the usb.
Great post Neo pictures are always best for me :stupid:
Tags for this Thread