How to fix the screen click on the Blackberry Storm
Credit to Jascias for this fix
This has fixed many members screen click problem.
1. You will need a micro TORX (T6) screw driver and small needle.
2. Open the back cover and you will see a red sticker, (The red sticker is a water detection sticker), and across from it you will see a torx screw. Under the red sticker is another screw. These 2 screws may be screwed on too tight.
3. Using the small needle, you can take off the sticker for replacement later.
Unscrew both screws in I would try turning in 1/8 turn increments.
4. Replace sticker, screen is fixed.
Take your time, and sometimes it may not be needed to adjust both screws.
Put your back cover on in between turns to test.
Hope this helps for those who wish to try it.
BlackberryOS and anyone associated do not take responsibility for any damage done by trying this procedure.
Please do so at your own risk.