Page 27 of 59 FirstFirst ... 17252627282937 ... LastLast
Results 209 to 216 of 472

  1. #209
    Join Date
    Mar 2009
    Location
    Los Angeles, CA
    Device
    9630/9550/9530/
    Posts
    8,538
    Quote Originally Posted by manofice View Post
    My phone volume and BT speakphone volume are VERY low, If I go to dial someone it might start loud like it's supposed to be but then goes real soft even with the volume all the way up, this does this also when it's on my BT speakerphone. Any thoughts? This is the first hybrid to do this
    Sorry Stiefler let me step in here for a second being the master bluetooth expert LOL. Did you ever run .148 on its own? If so, how was your BT on that. I have had significant problems with the same issue you have with any SFI from the 140's.



  2. #210
    Join Date
    Apr 2009
    Location
    Ohio
    Device
    Moto Droid/HTC Eris
    OS
    2.0.1/2.1
    Posts
    3,385
    Quote Originally Posted by jlevy73 View Post
    Sorry Stiefler let me step in here for a second being the master bluetooth expert LOL. Did you ever run .148 on its own? If so, how was your BT on that. I have had significant problems with the same issue you have with any SFI from the 140's.
    No not a problem, i was hoping you would chime in Captain Blue tooth :fing02:

  3. #211
    Join Date
    Mar 2009
    Location
    Los Angeles, CA
    Device
    9630/9550/9530/
    Posts
    8,538
    Quote Originally Posted by Stiefler07 View Post
    No not a problem, i was hoping you would chime in Captain Blue tooth :fing02:
    :chairshot:



  4. #212
    Join Date
    Apr 2009
    Location
    Charlotte
    Device
    Bold 9930
    OS
    7.0.0.353
    Posts
    701
    Quote Originally Posted by jlevy73 View Post
    Sorry Stiefler let me step in here for a second being the master bluetooth expert LOL. Did you ever run .148 on its own? If so, how was your BT on that. I have had significant problems with the same issue you have with any SFI from the 140's.
    I did run .148 on it's own but don't remember If I tested BT with it, I was running .148 v7 since it came out with no issues whats so ever, issue only arose since installing 7.1 which I did a clean wipe and uninstalled 148 and reinstalled it and then installed everything else

  5. #213
    Join Date
    May 2009
    Location
    Florida
    PIN
    3069D40A
    Device
    Storm 9530
    OS
    5.0.0.140 Querky but alot better
    Posts
    36
    Quote Originally Posted by jlevy73 View Post
    Since I do not use a holster I cannot address that issue. But for the second one, everything works fine. Perhaps try going with straight 148 and see if this happens. If it does might be a hardware problem, if it doesn't then perhaps your phone has some glitches with the hybrid.
    Ok.. I knew I saw a post on this issue... I have mine holstered as well and I believe I found the glitch. (at least for mine)

    It is an accelerometer issue. i holster mine then when it rings I pull it out of the holster and notice the screen flipping from landscape to portrait and back if you push the button while it is still switching the phone ignores the button push.

    Not sure if it is because the sensor is slow to respond or the process speed of the OS but that is definitely how mine is reacting. My work around is for now to patiently wait an extra second and make sure the screen is steady then she answers like she should.hone:



  6. #214
    Join Date
    May 2009
    Location
    Florida
    PIN
    3069D40A
    Device
    Storm 9530
    OS
    5.0.0.140 Querky but alot better
    Posts
    36
    Quote Originally Posted by manofice View Post
    I did run .148 on it's own but don't remember If I tested BT with it, I was running .148 v7 since it came out with no issues whats so ever, issue only arose since installing 7.1 which I did a clean wipe and uninstalled 148 and reinstalled it and then installed everything else
    Have you gone into the media settings and enabled Audio boost? I did that and now i can hear my bluetooth from the table.

  7. #215
    Join Date
    Jun 2009
    Location
    NYC
    Device
    Motorola Razr2
    Posts
    145
    Any of you guys get some glitch where after you end a call you see the dial pad, but instead of numbers you see symbols? I've been getting that a lot.

    Also issues with the green button, seems like I have to physically push it down twice to answer a call.

    Other than that, memory holds up and I have less hour glass/less lag.

    My first hybrid attempt, actually an upgrade from v7, and I am very impressed thus far, still better than stock .148 :cool2:

  8. #216
    Join Date
    Mar 2009
    Location
    vancouver bc
    Device
    9630
    OS
    5.0.0.XXX
    Posts
    1,573
    hey berry,

    yes the green button issue is common. how ever the symbols, I've seen it before randomly on some older os's. are you running a theme?

Page 27 of 59 FirstFirst ... 17252627282937 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •